Professional Molecular Repair Mist 300 mL

Professional Molecular Repair Mist 300 mL (WHOLESALE)

professional molecular repair mist 300mL

part of the K18 molecular repair service

Rated 5.0 out of 5

Based on 140 reviews

This leave-in lightweight mist strengthens hair’s defense prior to damaging chemical services. Powered by the K18PEPTIDE™ to reconnect broken polypeptide chains and disulfide bonds to renew strength and elasticity in just 4 minutes.

Repairs Damage Caused By

Bleach + Color
Heat
Chemical Services

Professional Only

Find a Distributor

Every purchase supports K18 x Plastic Bank efforts to radically simplify waste.

In 2022 we stopped
147 Metric tons of plastic

7.3M+ single-use plastic bottles from reaching the ocean

more to know

The K18PEPTIDE™ works at the innermost layer of hair, reconnecting polypeptide chains and reconforming disulfide bonds broken during bleaching & chemical services. By addressing these damage sites at the innermost layer of hair, core strength and elasticity are renewed for strong, smooth, bouncy hair—even after the most extreme damage done in the salon.

pH level of 7.5-8.0 shifts the cuticle layer open to deliver the K18PEPTIDE™ to damage sites on the molecular level.

key benefits

In cases of extreme damage or certain salon services, the mist works alone to renew hair without weighing it down.
Powered by the patented K18PEPTIDE™, engineered over 10 years in a biotech lab to work on the molecular level to rebuild hair from the inside out in just 4 minutes.
Because the K18PEPTIDE™ works at the molecular level, it works on every single hair type
Clinically proven to reverse hair damage from: Bleach + Color, Chemical Services, Heat
Restores strength, softness, smoothness, and bounce
Immediate + progressive results
Vegan, color-safe, cruelty-free

With just one salon treatment using the K18 PRO service (PRO mist + PRO mask), hair is restored up to:

91% original strength*
94% original elasticity*

*Results observed in a clinical study while using mist and mask as part of a bleaching treatment. Results may vary depending on hair type, quality and history.

how to use

How to use with a chemical service

Turn trigger to "on" position.
Prior to your service, mist hair with water (do not saturate).
Section dry hair into 4 quadrants
Apply 4-9 sprays of K18 PRO mist per quadrant based on length and density
Let sit for 4 minutes. Do not rinse out.
Dry hair if needed, then perform desired chemical service
Shampoo, do not condition.
Towel dry thoroughly.
Depending on service follow with the K18 PRO mask to complete the PRO service.

*Refer to the K18 service guide for specific usage instructions by chemical service.

How to use as part of a styling service or as part of a K18 PRO service standalone treatment:

Turn trigger to "on" position.
Before haircuts, styling, or using as a treatment, cleanse hair with K18 detox shampoo for the cleanest canvas. Do not condition.
Towel dry thoroughly
Section hair into 4 quadrants
Apply 4-9 sprays of K18 PRO mist per quadrant based on length and density
Immediately apply K18 PRO mask on top (remember it's highly concentrated so only use about 1-3 pumps).
Wait 4 minutes, do not rinse.
Style as usual.

how to optimize K18

DO saturate the hair with water first
DO wait 4 minutes to activate
DO use pre-service to strengthen your canvas or throughout depending on the service and hair needs

DON'T mix into your bleach or color
DON'T increase your bleach volume or alter your typical color formula
DON'T rinse it out

ingredients

Water (Aqua) (Eau), Alcohol Denat., Propylene Glycol, Polysorbate 20, sh-Oligopeptide-78 (K18PEPTIDE™), Hydrolyzed Wheat Protein, Hydrolyzed Wheat Starch, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Phenoxyethanol, Potassium Sorbate, Potassium Hydroxide, Fragrance (Parfum), Geraniol, Linalool, Hexyl Cinnamal, Benzyl Alcohol.

Description

healthy hair starts
in the salon

Protect the strength & integrity of hair during an extreme color transformation with K18 Mist & Mask.

Restore & strengthen hair with K18 Mist & Mask during highlights service.

Bring brittle aging hair back to its youthful state with K18 Mask & Mist.

How to use K18 Mist with a perm featuring co-founder Spoke & Weal Salons, Christine Thompson.

how to use K18

lightener / bleach
1. Prep hair by lightly misting with water.
2. Generously apply K18 PRO mist section by section.
3. Wait 4 minutes to allow K18 to penetrate hair strands. DO NOT rinse out (this is a good time to mix color or prepare your lightening service.)
4. Dry hair if needed. Apply the lightener directly on top of K18 PRO mist and process as usual.
5. Shampoo hair, do not condition. Towel dry thoroughly until about 65% damp.
6. Start with 1 pump at a time of the K18 PRO mask, spreading it between your hands to evenly distribute the highly concentrated formula (add more as needed to encounter any missed strands. Average use is 2 pumps, most extreme thick or curly–coily hair use 3 pumps max.)
7. Leave for 4 minutes before styling. DO NOT rinse out.
8. If toning, apply toner or gloss on top of K18 PRO mask. Process toner or gloss as required. Shampoo and rinse. Towel dry thoroughly. Follow with a secondary application of K18 PRO mask.
9. Wait 4 minutes before combing, then style, and add product as usual.
color
1. Prep hair by lightly misting with water
2. Generously apply K18 PRO mist section by section.
3. Wait 4 minutes to allow K18 to penetrate hair strands. DO NOT rinse out (this is a good time to mix or prepare for your color service.)
4. Dry hair if needed. Apply color directly on top of K18 PRO mist and process as usual.
5. Shampoo hair, do not condition. Towel dry thoroughly until about 65% wet.
6. Start with 1 pump at a time of the K18 PRO mask, spreading it between your hands to evenly distribute the highly concentrated formula (add more as needed to encounter any missed strands. Average use is 2 pumps, most extreme thick or curly–coily hair use 3 pumps max.
7. Wait 4 minutes before combing, then style and add product as usual.
keratin straightener
1. Prep hair by lightly misting with water.
2. Generously apply K18 PRO mist section by section.
3. Wait 4 minutes for K18 to penetrate. DO NOT rinse out.
4. Clarify per your keratin straightener instructions (1-7 times).
5. Apply and process keratin straightener as usual.
*for best results, wait 3-4 shampoos post-treatment before using the K18 PRO mask in the salon or at home.
relaxer
1. Prep hair by lightly misting with water.
2. Generously apply K18 PRO mist section by section.
3. Wait 4 minutes to allow K18 to penetrate hair strands. DO NOT rinse out. (this is a good time to prepare your relaxer solution.)
4. Apply relaxer directly on top of K18 PRO mist and process as usual.
5. Start with 1 pump at a time of the K18 PRO mask, spreading it between your hands to evenly distribute the highly concentrated formula (add more as needed to encounter any missed strands. Average use is 2 pumps, most extreme thick or curly–coily hair use 3 pumps max.)
6. Let sit for 4 minutes to activate.
7. Follow with neutralizing shampoo, do not conditioner. Towel dry thoroughly until about 65% wet.
8. Re-apply K18 PRO mask. Wait 4 minutes before combing, then style and add product as usual.
perm
1. Prep hair by lightly misting with water.
2. Generously apply K18 PRO mist section by section.
3. Wait 4 minutes to allow K18 to penetrate hair strands. DO NOT rinse (use this time to prepare your perm solution.)
4. Apply perm solution directly on top of mist.
5. Rinse and follow with neutralizer as usual.
6. Rinse neutralizer and re-apply K18 PRO mist. Let sit for 4 minutes before styling.
*don’t use K18 PRO mask after your perm service to avoid weighing down fresh curls.
thermal reconditioner
1. Prep hair by lightly misting with water.
2. Generously apply K18 PRO mist section by section.
3. Wait 4 minutes for K18 to penetrate. DO NOT rinse out. (this is a good time to prepare your thermal reconditioner solution.)
4. Apply and process as usual.
5. Rinse and apply neutralizer.
6. Once neutralizer has processed, rinse, lightly shampoo, then towel dry thoroughly until about 65% wet.
7. Start with 1 pump at a time of the K18 PRO mask, spreading it between your hands to evenly distribute the highly concentrated formula (add more as needed to encounter any missed strands. Average use is 2 pumps, most extreme thick or curly–coily hair use 3 pumps max.)
8. Wait 4 minutes before combing, then style and add product as usual.

how K18 works

Traveling into the innermost layers of hair, our K18PEPTIDE™ renews strength along the width AND length of hair for lasting strength where it matters.

have questions? we have answers.

who is K18 PRO mist for?

K18 PRO mist is engineered to work with every hair type, in every service, and with every routine.

why is the PRO mist used before chemical services?

K18 PRO mist is typically used before chemical services to set clients up for success, renewing existing damage for the strongest canvas to create on. In cases of extreme damage or fine hair, the PRO mist renews hair without weighing it down

why do I mist hair with water before using the PRO mist?

Water will swell the cuticle layers to open up the hair fiber and allow for maximum penetration of the PRO mist into the innermost layers of hair. In the same way a damp sponge absorbs more water, damp hair absorbs K18PEPTIDE™.

how much PRO mist do I use?

You can apply 6-12 sprays of K18 PRO mist per quadrant based on length and density of your client’s hair. Hair should feel slightly damp.

do I need both PRO mist + mask?

Made to amplify each other, using the K18 PRO Service ensures the best results by doubling down on the K18PEPTIDE™ and renewing hair to like new strength and elasticity.

reviews

Write a Review

average rating 5.0 out of 5

Based on 140 reviews